C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
13. Install the sensor mounting bolt.
Tighten the mounting bolt to 25 Nm (18 ft. lbs.).
14. Install the sensor electrical connector.
15. Install the generator bracket to the engine block.
16. Install the engine lift bracket to the engine block.
17. Install the engine oil fill tube to the engine front cover.
Tighten the oil fill tube nuts to 23 Nm (17 ft. lbs.).
18. Install the A/C compressor to the engine lift bracket.
Tighten the A/C compressor mounting bolts to 50 Nm (37 ft. lbs.).
19. Connect both the battery negative cables to the batteries.
20. Reset the TDC off set timing procedure.
