C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
4. Install the backing plate bolts.
Tighten the backing plate bolts to 28 Nm (20 ft. lbs.).
5. Apply gasket maker GM P/N 1052942, or equivalent to the water pump backing plate. The sealer must, be wet to the touch when the bolts are
installed and tightened.
6. Install the water pump and the water pump backing plate to the engine.
7. Install the bolts and the studs. Tighten
^
Tighten the water pump to front cover bolts to 42 Nm (31 ft. lbs.).
^
Tighten the water pump plate to front cover bolts to 28 Nm (20 ft. lbs.).
