C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
7. Remove the exhaust crossover pipe from the exhaust manifold.
8. Remove the exhaust manifold bolts and stud/nuts from the cylinder head.
9. Remove the exhaust manifold from the cylinder head.
10. Clean and inspect the sealing surface of the cylinder head.
11. Clean the threads on the exhaust manifold bolts and stud/nuts.
Installation Procedure
1. Install the exhaust manifold to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust manifold bolts.
Tighten the bolts and stud/nuts to 35 Nm (26 ft. lbs.).
3. Install a new seal for the removed exhaust crossover pipe.
4. Install the crossover pipe to the exhaust manifold.
