chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Heating, Ventilation and Air Conditioning|Page 7811 > < Air Door Cable, HVAC|Service and Repair|Page 7806
Page 1
background image

Air Duct: Service and Repair
Heating, Ventilation and Air Conditioning

AIR DISTRIBUTOR DUCT REPLACEMENT

REMOVAL PROCEDURE

CAUTION:  Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the battery negative cable.
2. Roll back the instrument panel.
3. Remove the duct mounting screws.
4. Remove the duct from the instrument panel.

INSTALLATION PROCEDURE

1. Install the duct to the instrument panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the duct mounting screws.

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

3. Install the instrument panel bezel.

Heating, Ventilation and Air Conditioning|Page 7811 > < Air Door Cable, HVAC|Service and Repair|Page 7806