C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Control Assembly: Service and Repair
HVAC Control Assembly Replacement (C60)
REMOVAL PROCEDURE
1. Remove the IP cluster bezel.
2. Remove the HVAC control assembly by firmly depressing and holding the retaining tabs and then sliding the assembly away from the dash.
3. Disconnect the electrical connectors from the HVAC control assembly.
4. Remove the HVAC control assembly.
INSTALLATION PROCEDURE
1. Install the HVAC control assembly.
2. Connect the electrical connectors to the HVAC control assembly.
3. Install the HVAC control assembly to the I/P carrier until a snap is heard.
4. Install the IP cluster bezel.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID
