C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Backup Lamp Switch: Service and Repair
Backup Lamp Switch Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the backup lamp switch electrical connector.
3. Remove the backup lamp switch.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Ensure the gasket is installed on the switch.
Install the, backup lamp switch.
-
Tighten the backup lamp switch to 28 Nm (21 ft. lbs.).