C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Brake Light Switch: Service and Repair
Stoplamp Switch Replacement
Removal Procedure
1. Remove the pushrod retainer from the brake pedal pin.
2. Unclip the stoplamp switch from the pushrod.
3. Disconnect the electrical connector from the stoplamp switch.
Installation Procedure
1. Connect the electrical connector to the stoplamp switch.
2. Snap the stoplamp switch onto the pushrod.
3. Install a new pushrod retainer on the brake pedal pin. Use an 11 mm (7/16 inch) socket in order to push a new clip onto the pin.
