C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
ENGINE COOLANT TEMPERATURE (ECT) SENSOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cables.
2. Drain the cooling system below the level of the sensor.
3. Remove the electrical connector by releasing the locking tab.
4. Remove the sensor.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the sensor into the engine.
Tighten
Tighten the sensor to 25 N.m (18 lb ft).
