C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the primary battery negative cable.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the secondary ground wire bolt.
Tighten
Tighten the secondary ground wire bolt to 4.5 N.m (40 lb in).
3. Install the secondary battery negative cable.
4. Install the negative battery cables to the intake manifold studs.
5. Install the negative battery cable nuts.
Tighten
Tighten the negative battery cable nuts to 17 N.m (13 lb ft).
6. Install a NEW tie strap on the secondary battery negative cable.
7. Connect the negative battery cable.
