C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the generator.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Loosely install the generator bracket bolts.
3. Install the auxiliary bracket bolts.
Tighten
3.1. Tighten the generator brace short bolts to 25 N.m (18 lb ft).
3.2. Tighten the generator mounting bolts to 50 N.m (37 lb ft).
4. Install the radiator inlet hose brace on the generator.
Tighten
Tighten the hose brace bolt to 3 N.m (27 lb in).
5. Install the drive belt to the generator.
6. Connect the battery lead to the back of the generator.
Tighten
Tighten the battery terminal nut to 8 N.m (71 lb in).
7. Connect the terminal plug from the back of the generator.
8. Connect the battery negative cable.
