C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the generator bracket to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the generator bracket bolts to the engine block.
Tighten
Tighten the bolts and nuts to 50 N.m (37 lb ft).
3. Install the drive belt tensioner to the generator bracket.
Tighten
Tighten tensioner bolt to 50 N.m (37 lb ft).
4. Install the vacuum pump to the generator bracket.
5. Install the generator to the generator bracket.
6. Install the upper fan shroud to the radiator.
7. Connect both the battery negative cables to the batteries.
Generator Brace Replacement
REMOVAL PROCEDURE