C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the drag link to the adjuster sleeve.
2. Install the drag link ball stud to the tie rod (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the nut to the drag link ball stud.
-
Tighten the nut to 104 Nm (77 ft. lbs.).
4. Tighten the adjuster sleeve retaining nuts.
-
Tighten the adjuster sleeve nuts to 104 Nm (77 ft. lbs.).
5. Lower the vehicle.
