C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the bushings (8,12). ream the bushings to between 29.982 - 30.022 mm (1.1804 - 1.1820 inch).
2. Install the steering knuckle (10).
3. Install the thrust bearing shim and dust seal.
Lubricate the thrust bearing. Refer to Fluid and Lubricant Recommendations.
4. Install the king pin and the lock pin (21).
-
Lubricate the king pin. Refer to Fluid and Lubricant Recommendations.
-
Insert the spacers in the correct order.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the lock pin retaining nut and washer.
-
Tighten the lock pin retaining nut to 40 Nm (29 ft. lbs.).
6. Install the gaskets (6,13).
7. Install the upper and lower steering knuckle caps (5,14).
8. Install the brake caliper dust shield.
9. Install the brake rotor. Refer to Brake Rotor Replacement - Front in Brakes and Traction Control.
10. Install the brake caliper mounting bracket and bolts.
-
Tighten the brake caliper mounting bolts to 105 Nm (78 ft. lbs.).
11. Install the brake caliper.
12. Install the key support to the caliper.
