C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the pitman arm on the pitman arm shaft.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the pitman arm washer and the nut (8).
-
Tighten the pitman arm nut to 250 Nm (184 ft. lbs.).
3. Install the connecting rod to the pitman arm ball stud.
Make sure the ball stud seal is on the ball stud.
4. Install the J 29194 to the connecting rod.
-
Tighten the J 29194 to 62 Nm (48 ft. lbs.).
5. Remove the J 29194.
6. Install the pitman arm nut to the pitman arm ball stud.
-
Tighten the pitman arm nut to 50 Nm (37 ft. lbs.).
7. Lower the vehicle.
