C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
9. Install the shock absorber to the axle.
10. Install the washer and the nut.
-
Tighten the nut to 185 Nm (136 ft. lbs.).
11. Install the steering arm, the knuckle, and the spindle. Refer to Steering Knuckle and King Pin Replacement.
12. Adjust the wheel bearings. Refer to Wheel Bearing Adjustment.
13. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
14. Lower the vehicle.
15. Check the front wheel alignment. Refer to Measuring Wheel Alignment.