C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
1. Install the stabilizer shaft link to the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the insulators, washers and the nuts retaining the stabilizer shaft link to the frame.
^
Tighten the nut retaining the stabilizer shaft link to the frame until the distance between each retainer is 38 mm (1.5 inch).
3. Install the stabilizer shaft link pin retaining nuts.
^
Tighten the nut retaining the stabilizer shaft link to the stabilizer bar to 68 Nm (50 ft. lbs.).
4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
5. Lower the vehicle.
