C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
1. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Vehicle Lifting.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
3. Remove the nut and the washer.
4. Remove the shock absorber from the leaf spring spacer.
5. Remove the nut, the washer, and the bolt.
6. Remove the shock absorber from the frame.
7. Inspect the shock absorbers for damage and leakage.
Installation Procedure
1. Install the shock absorber to the frame. Insert the bolt through the upper shock bracket and the shock absorber.
2. Install the washer and the nut. Do not tighten.
3. Install the shock absorber to the leaf spring spacer. Position the lower shock mount onto the stud.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the washer and the nut.
-
Tighten the upper nut to 185 Nm (136 ft. lbs.).
-
Tighten the lower nut to 50 Nm (37 ft. lbs.).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
6. Lower the vehicle.
7. Dispose of the shock absorber. Refer to Shock Absorber Disposal.
