chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Pressure Regulating Solenoid, A/T|Service and Repair|Page 5139 > < PCM/BCM Replacement - DTC's B001/B1271/B1780 Set
Page 1
background image

Pressure Regulating Solenoid: Service and Repair

Pressure Regulator Replacement 

^

Tools Required 
-

J36850 Transjel (R)

Removal Procedure 

1. Raise the vehicle. Refer to Vehicle Lifting. 
2. Remove the transmission oil pan and the filter. 

Caution: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result

3. Remove the reverse boost valve bushing retainer ring (2). 

4. Remove the following from the reverse boost valve cylinder:

^

The reverse boost valve bushing

^

The reverse boost valve

^

The pressure regulator spring retainer

^

The pressure regulator spring

^

The pressure regulator valve

^

The reverse boost valve bushing

Installation Procedure 

1. Install the pressure regulator valve with J36850.

Pressure Regulating Solenoid, A/T|Service and Repair|Page 5139 > < PCM/BCM Replacement - DTC's B001/B1271/B1780 Set