C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
2. Ensure the retainer (3) and the wiring harness bracket (2) are properly seated on the hydraulic brake booster (4).
3. Install the master cylinder (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the master cylinder nuts.
Tighten the nuts to 36 Nm (27 ft. lbs.).
5. Remove the rubber cap or plug from the exposed brake pipe fitting ends.
6. Connect the brake pipes.
Tighten the pipe fittings to 25 Nm (18 ft. lbs.).
7. Bleed the hydraulic brake system.
8. Release the park brake.