C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Parking Brake Shoe: Service and Repair
Park Brake Shoe Replacement
Removal Procedure
1. Release the park brake.
2. Raise the vehicle and support the vehicle with safety stands. Refer to Vehicle Lifting.
3. Remove the drum.
4. Release the tension from the index lever by unhooking the spring from the index lever.
5. Remove the transmission yoke bolt from the automatic transmission, or nut from the manual transmission.
6. Pull out on the transmission yoke to remove it from the transmission.
7. Remove the support plate bolts and washers.
8. Remove the backing plate, support plate, index lever and spring, and park brake shoe assembly from the vehicle.
9. Separate the support plate and the park brake shoe assembly from the backing plate.
10. Remove the park brake shoe retaining springs.
11. Remove the park brake shoes.