C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Tools Required
^
J38416-B Harmonic Balancer Remover
^
J42845 Crankshaft Balancer Installer
^
J42846 Crankshaft Protector Button
^
J42847 Flywheel Holding Tool
Removal Procedure
1. Remove the fan.
2. Remove the fan shroud (lower).
3. Remove the drive belt.
4. Remove the starter motor.
Important: Make sure the teeth of the flywheel holding tool engage the engine flywheel teeth.
5. Install the J42847to the starter bolt holes.
Tighten the J42847 bolts to 50 Nm (37 ft. lbs.).
6. Remove the crankshaft balancer bolt and washer.
7. Install the J42846 onto the end of the crankshaft.