C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
10. Tighten the valve rocker arm cover bolts in sequence using two passes. Tighten
10.1.
Tighten the valve rocker arm cover bolts to 6 Nm (53 inch lbs.) a first pass.
10.2.
Tighten the valve rocker arm cover bolts to 12 Nm (106 inch lbs.) a final pass.
Important: Fully install the spark plug wires by pushing on the exposed end of the spark plug boot.
Do not push the spark plug wire on to the spark plug by using the metal heat shield.
11. Install the spark plug wires to the ignition coils.
12. Connect the ignition coil harness electrical connector (3).
13. Install the CPA retainer at the ignition coil electrical connector.