C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Exhaust Crossover Pipe: Service and Repair
Exhaust Crossover Pipe Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the bolts from the exhaust crossover pipe.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the crossover pipe to the exhaust manifolds with new flange seals and bolts.
Tighten the new bolts to 34 Nm (25 ft. lbs.).
2. Lower the vehicle.
