C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
1. Disconnect the Mass Airflow (MAF) sensor electrical connector (4).
2. Disengage the cover clips (2).
3. Remove the air cleaner cover (1).
4. Loosen the air intake duct clamp at the throttle body.
5. Remove the air intake duct and air cleaner element.
6. Install a breaker bar to the belt tensioner.
7. Rotate the belt tensioner clockwise in order to relieve tension on the drive belt.
8. If equipped with Air Conditioning (A/C), remove the drive belt (1) from the pulleys and the tensioner.