C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Steps 1-5
Steps 6-8
The numbers below refer to the step numbers on the diagnostic table.
1. A module which loses power during an ignition cycle will cause other modules to set Lost Communication DTCs.
2. A module which loses power during an ignition cycle will cause other modules to set Lost Communication DTCs.
5. The EBCM which was not communicating may have detected a short to voltage on one or both of the front low reference circuits of the wheel
speed sensors. This step checks for a short to voltage in these low reference circuits in the front wheel speed sensors.