C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
15.
Press the up-arrow to select the: "FastLearn Adapt Process", Press Enter.
16.
Follow the Instructions displayed on the Tech 2. You will notice the Transmission Fluid Temperature is displayed in a Bar graph at the top of the
Tech 2 display screen.
17.
When the Tech 2 states the Fast Learn has completed, Exit to the main menu.
18.
Disconnect the Tech 2.
19.
Drive the vehicle long enough and far enough at a steady throttle at a speed where at least three (3), 31 upshifts occur, on the same ignition cycle.
The technician should then verify the operating characteristics of the transmission and that transmission shift quality is acceptable before releasing the
vehicle to the customer.
Warranty Information
This labor operation table is submitted for your use when servicing these vehicles under warranty. Each of the labor codes listed below will have an
additional 0.4 hr added to the previously published time in the next labor time revision.
Disclaimer
