C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
2. Install the pitman arm washer and the nut (8).
-
Tighten the pitman arm nut to 250 Nm (184 ft. lbs.).
3. Install the connecting rod to the pitman arm ball stud.
Make sure the ball stud seal is on the ball stud.
4. Install the J29194 to the connecting rod.
-
Tighten the J29194 to 62 Nm (48 ft. lbs.).
5. Remove the J29194.
6. Install the pitman arm nut to the pitman arm ball stud.
-
Tighten the pitman arm nut to 50 Nm (37 ft. lbs.).
7. Lower the vehicle.