C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
4. Install the stabilizer link to the axle.
5. Install the link into the hole on the spring spacer and the axle.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the insulator, the retainer, and the nut.
-
Tighten the nut until the distance between each retainer is 38.0 mm (1.5 inch).
7. Install the stabilizer link to the stabilizer shaft.
8. Install the washer and the nut.
-
Tighten the nut to 68 Nm (50 ft. lbs.).