C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
7. Using the J24319-B remove the tie rod from the steering arm.
8. Remove the brake rotor.
9. Remove the bolts retaining the brake caliper mounting bracket.
10. Remove the brake caliper dust shield.
11. Remove the upper steering knuckle cap (5) and gasket (6).
12. Remove the lower steering knuckle cap (14) and gasket (13).
13. Remove the king pin (7) lock pin (21).
-
Using a drift, drive out the king pins.
-
The spacers and the bushings (8, 12) will also come out.
14. Remove the steering knuckle (10) from the axle.
15. Remove the dust seal, shim and the thrust bearing.
Installation Procedure
