C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Shift Cable: Service and Repair
Automatic Transmission Range Selector Cable Replacement
Automatic Transmission Range Selector Cable Replacement
Removal Procedure
1. Position the steering column transmission shift lever to PARK (P).
2. Remove the carpet and the carpet retainers on the driver's side to expose the shift cable.
3. Disconnect the shift cable from the steering column shift control.
4. Disconnect the shift cable from the retainers on the cab floor pan.
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Remove the cable retainer from the transmission mounted bracket. Squeeze the cable retainer while pulling the cable towards the rear of the
vehicle.
7. Disconnect the cable end from the transmission shift ball stud.
8. Position the transmission shift to PARK (P). Rotate the shift clockwise until the lever reaches the full clockwise stop position.