C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
8. Remove the outer hub bearing and the bearing cup using the J 35290 (2) and the J 8092 (1).
9. Remove the wheel bearing spacer.
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
-
The outer wheel bearing
-
The inner wheel bearing
-
The outer wheel bearing cup
-
The inner wheel bearing cup
-
The axle housing
2. Install the wheel bearing spacer into the wheel hub.
The tabs on the spacer must face towards the inner wheel bearing.