C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Shifter M/T: Service and Repair
Control Lever and/or Boot Replacement
Control Lever and/or Boot Replacement
Removal Procedure
Important: DO NOT move the shift lever assembly adjustment nut if replacing the control lever.
1. Remove the control lever.
2. Remove the control lever boot retainer plastic retainers, if necessary.
3. Remove the control lever boot retainer, it necessary.
4. Remove the control lever boot screws, if necessary.
5. Remove the control lever boot, if necessary.
6. Remove the control lever insulator, if necessary.
Installation Procedure
