C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
14. Using masking tape in order to mark the locations (1) of the window (2) in the opening.
15. Cut the masking in the center and remove the window from the opening.
Important: Use care when applying glass prep clear #1 on the window. This primer dries almost instantly, and may stain the viewing
area of the window if not applied evenly.
16. Use a new dauber in order to apply glass prep clear #1 to the area approximately 10-16 mm (3/8-5/8 in) around the entire perimeter of the window
inner surface.
Immediately wipe the glass primed area using a clean, lint-free cloth.
17. Apply a second coat of the glass prep clear #1 to the same area of the glass.
Important: The glass primer black #2 is effective up to 8 hours after applying it to the glass. The primed surface of the glass must be kept
clean.
18. Shake the glass primer black #2 for at least 1 minute.
19. Use a new dauber in order to apply the glass primer black #2 to the same areas (2) that glass prep clear #1 was applied.
20. Allow the glass primer to dry for approximately 10 minutes.