C 3500 Truck 2WD V8-393 6.5L DSL VIN P (1995)
Air Door Cable: Service and Repair
Temperature Cable
Temperature And Defrost Control Cable
Remove or Disconnect
1. Instrument cluster trim plate.
2. Control assembly.
3. Electrical connector.
4. Temperature cable from the heater control assembly.
5. Instrument panel storage compartment.
6. Temperature cable from the temperature valve.
A. Release cable from the temperature valve by squeezing retainer.
B. Squeeze post and lift cable end to remove.
Install or Connect
1. Index the cable before installing.
A. Cycle the temperature rotary knob to full "cold."
B. Make sure the temperature door is closed.
2. Cable to the temperature valve.
A. Snap the cable onto the valve.
B. Secure the cable by snapping it into the heater case.
3. Temperature cable to the control assembly.
-
Route the cable in the same location as removed.
4. Instrument panel storage compartment.
5. Electrical connector.
6. Control assembly.
7. Instrument cluster trim plate.