C 3500 Truck 2WD V8-393 6.5L DSL VIN P (1995)
Heater Core: Service and Repair
Front
HEATER CORE REPLACEMENT
Heater Case (1 OF 2)
Heater Case (2 OF 2)
Remove or Disconnect
1. Engine coolant.
2. Instrument panel storage compartment. See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Service and Repair
3. Electrical connectors, as necessary.
4. Center floor air distribution duct.
5. Hinge pillar trim panels.
6. Blower motor cover.
7. Blower motor.
8. Steering column.
9. Roll instrument panel back.
10. Coolant recovery reservoir.
11. Heater hoses. Refer to "Heater Hoses" in this section.
12. Screw on interior side of cowl, near the evaporator pipe (if equipped) while holding heater case to the cowl.
13. Four screws on the engine side of the cowl holding the heater case to the cowl.
14. Two nuts on the engine side of the cowl holding the heater case to the cowl.
15. Heater case.
-
It may be necessary to have an assistant when removing heater case.
16. Heater cover.
-
Remove seven screws that hold cover to the heater case.
17. Heater core from retainer.