C 3500 Truck 2WD V8-393 6.5L DSL VIN P (1995)
Alignment: Specifications
Alignment Specifications
With I-Beam Suspension
Caster, Degrees
Checking [01] [03] ........................................................................................................................................................................................ +1.25 +/- 0.5
Setting [02] [03] ............................................................................................................................................................................................ +1.25 +/- 0.5
Camber, Degrees
Checking [01] ................................................................................................................................................................................................ +1.25 +/- 0.5
Setting [02] .................................................................................................................................................................................................... +1.25 +/- 0.5
Toe-In, Degrees
Checking ........................................................................................................................................................................................................ 0.12 +/- 0.12
Setting ............................................................................................................................................................................................................ 0.12 +/- 0.12
Toe-in, Inches
Checking ................................................................................................................................................................................................ 0.06 in +/- 0.06 in
Setting .................................................................................................................................................................................................... 0.06 in +/- 0.06 in
[01] Left and right side should be equal within +1.0 deg.
[02] Left and right side should equal within +0.5 deg.
[03] No means of adjustment provided.
Without I-Beam Suspension
Caster, Degrees
Checking [01] ................................................................................................................................................................................................ 3.75 +/- 2.0
Setting [02] .................................................................................................................................................................................................... 3.75 +/- 1.0
Camber, Degrees
Checking [01] .................................................................................................................................................................................................. 0.5 +/- 1.0
Setting [02] ...................................................................................................................................................................................................... 0.5 +/- 0.5
Toe-In, Degrees
Checking [03] ................................................................................................................................................................................................ 0.24 +/- 0.2
Setting [03] .................................................................................................................................................................................................................. 0.24
Ball Joint Wear, inches [04] ............................................................................................................................................................................................ 0.08
Note: Caster angle must be corrected to level frame angle.
[01] Left and right side should be equal within +1.0 deg.
[02] Left and right side should equal within +0.5 deg.
[03] Toe-in left and right side to be set equally per wheel and steering wheel must be held in straight ahead position within +/-5.0 deg.
[04] Refer to /Steering & Suspension/ Ball Joint Inspection for inspection procedure.