chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Paint - Truck Codes and Suppliers|Page 8562 > < Paint - Truck Codes and Suppliers|Page 8560
Page 16
background image

attaching the liner as you go. Repeat this process to the opposite fender.

2.

Apply the rear fender liner to the inside rear of the fender as illustrated (Figure 1). Take care to overlap the rear liner on the top liner as illustrated.
Repeat this process to the opposite fender.

3.

Apply moderate pressure to the entire surface of the fender liners to insure good adhesion to the inside of the fenders.

Parts Information

Part quantity reflects the number required to do both fenders on one vehicle.

P/N

Description

Qty

15741040

Protector-rear

2

fender upper

15741041

Protector-rear

2

fender rear

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Op

Description

Labor Time

B8340

Install fender liner,

0.3 hr

right side

B8341

Install fender liner,

0.3 hr

left side

B8342

Install fender liner,

0.5 hr

both sides

Technical Service Bulletin # 231054R

Date: 930701

Paint - Identification/Repair of Colorcoat Delamination

BULLETIN NUMBER: 92-1O-134A

SECTION: 10 Body

NUMBER: 4

CORPORATE REFERENCE NUMBER: 231054R

DATE: July 1993

SUBJECT:
SERVICE PROCEDURES FOR IDENTIFICATION AND REPAIR OF PAINT COLORCOAT DELAMINATION FROM ELPO PRIMER

MODELS:
1988-92 TRUCKS

THIS BULLETIN CANCELS AND REPLACES TRUCK SERVICE BULLETIN 92-10-134 (CORP # 231054R), DATED OCTOBER 1992. IT IS
BEING REVISED TO REMOVE THE COVER LETTER PORTION AND SUBJECT STATEMENT NOW INCLUDES NOTE FOR TRUCKS AND
REVISES THE MONOCOAT MATERIAL ALLOWANCES ON "G", "S/T" AND SOME "R/V" MODELS. THE ALLOWANCE FOR "ADD FOR
TWO-TONE" ON G AND S/T TRUCKS HAS BEEN CHANGED. ALL COPIES OF 92-10-134 SHOULD BE DISCARDED.

The revisions are the result of changes to the MONOCOAT (ENAMEL) material allowance charts published in June, 1993.

Six (6) of the "G" model revisions use Basecoat/Clearcoat material allowance codes. THESE ARE TO BE USED AS DOLLAR REFERENCES ONLY,
AND ARE MARKED WITH A # INDICATOR. Continue to repair these vehicles with monocoat materials. DO NOT repair these vehicles with
Basecoat/Clearcoat products.

Use the latest (June, 1993) material allowance charts when submitting claims.

Paint - Truck Codes and Suppliers|Page 8562 > < Paint - Truck Codes and Suppliers|Page 8560