C 3500 Truck 2WD V8-454 7.4L (1990)
Fig. 8 Exploded View Of Front Suspension. 3500 HD Models
REMOVE
1. Raise and support vehicle, then remove wheels.
2. Remove brake caliper.
3. Remove cap from hub/disc assembly.
4. Remove cotter pin, nut and washer.
5. Remove hub/disc from spindle.
6. Remove outer bearing, seal and inner bearing.
INSTALL
1. Reverse procedure to install, noting the following:
a. Clean all components before installing.
b. Apply an approved high temperature front wheel bearing grease to the spindle at the inner and outer bearing seat, shoulder and seal seat. Also
