C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
REMOVAL PROCEDURE
1. Remove the bezel.
2. Remove the control assembly from the roof panel.
3. Disconnect the electrical connectors.
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the control assembly to the roof panel.
3. Install the bezel.
4. Verify the circuit operation.
Control Assembly Replacement - AUX (Suburban-Front Overhead)
REMOVAL PROCEDURE
1. Remove the overhead console.
2. Disconnect the electrical connectors.
3. Remove the control assembly from the overhead console.
INSTALLATION PROCEDURE
1. Install the control assembly to the overhead console.
2. Connect the electrical connectors.
3. Install the overhead console.
4. Verify the circuit operation.
Control SW Replacement - Auxiliary (Suburban-IP Cluster)
