C 3500 Truck 2WD V8-6.0L VIN U (2001)
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the garnish molding.
5. Install the Third Pillar trim panel.
6. Install the rear seat.
Rear Window Lower Garnish Molding Replacement
Rear Window Lower Garnish Molding Replacement
Removal Procedure
1. Lightly pull the lower edge of the molding in order to release the clips. On extended cab fold the rear bench seat up. This will move the assembly
forward so that the molding can be accessed.
2. Lift the molding up and away from the glass in order to release the upper retainers.
Installation Procedure
1. Align the molding clips with the holes in the body panel along the back glass.
2. Snap the molding into place.
Trim Panel Replacement - Upper Extension
REMOVAL PROCEDURE