C 3500 Truck 2WD V8-6.0L VIN U (2001)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Removal Procedure
1. Apply the parking brake.
2. Remove the master cylinder.
3. Drain the master cylinder reservoir.
4. Clamp the master cylinder to a bench vice.
5. Using a hammer and a drift punch remove the roll pins securing the reservoir to the master cylinder. Discard the roll pins.
6. Firmly grasp the reservoir. Pull the reservoir upward in order to disengage the reservoir from the master cylinder.
Installation Procedure
