C 3500 Truck 2WD V8-6.0L VIN U (2001)
6. Disconnect the cruise control cable bead from the fitting on the cruise control module ribbon.
7. Remove the cruise control cable from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Secure all of the components of the accelerator and the cruise control cables as specified. Ensure that the throttle linkage operates
freely without binding between the idle position and the wide open throttle.
1. Remove the plastic cable retainer.
Discard the plastic cable retainer.
2. Install the cruise control cable to the vehicle.
3. Connect the cruise control cable bead to the fitting on the cruise control module ribbon.
4. Pull the cruise control cable until the cable is taut.
