C 3500 Truck 2WD V8-6.0L VIN U (2001)
Intake Manifold: Service and Repair
Intake Manifold Replacement - Unit Repair
Installation
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. If replacement of the intake manifold was required, install the EVAP solenoid isolator (1), solenoid (3) and bolt (2) to the NEW intake manifold.
^
Tighten the EVAP solenoid bolt to 10 Nm (89 inch lbs.).
2. If replacement of the intake manifold was required, install the accelerator control cable bracket (2) and bolts (1) to the NEW intake manifold.
^
Tighten the accelerator control cable bracket bolts to 10 Nm (89 inch lbs.).
