C 3500 Truck 2WD V8-6.0L VIN U (2001)
8. Install the AIR check valve pipe (crossover) bolt.
^
Tighten the AIR check valve pipe nuts to 50 Nm (37 ft. lbs.).
9. Position the junction block to the generator bracket.
10. Install the junction block bracket bolts.
^
Tighten the junction block bracket bolts to 9 Nm (80 inch lbs.).
11. Install the ECT sensor.
12. Install the spark plugs.
13. Raise the vehicle.
14. Install the exhaust manifold pipe nuts.
^
Tighten the exhaust manifold pipe nuts to 50 Nm (37 ft. lbs.).
15. Lower the vehicle.
