C 3500 Truck 2WD V8-6.0L VIN U (2001)
1. Install the suction hose assembly to the vehicle.
2. Connect the suction hose to the accumulator using new sealing washers.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the compressor suction hose nut at the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
4. Connect the suction hose (2) to the compressor using new sealing washers.
5. Install the suction hose mounting bolt.
Tighten
Tighten the bolt to 16 N.m (12 lb ft).
6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
7. Leak test the fittings of the component using the J 39400-A.
