C 3500 Truck 2WD V8-6.0L VIN U (2001)
Installation Procedure
1. If equipped without RPO C36 (auxiliary heater), install the vent inlet hose to the radiator.
2. If equipped with RPO C36 (auxiliary, heater), install the vent inlet hose to the radiator.
3. Position the vent inlet hose clamp at the radiator.
4. Install the vent inlet hose clip at the fan shroud.
5. Install the vent inlet hose to the throttle body.
6. Position the vent inlet hose clamp at the throttle body.
7. Install the radiator vent inlet hose to the radiator inlet hose clips.
8. If necessary, install the engine sight shield.
9. Refill the cooling system.
