chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Inflatable Restraint Sensing and Diagnostic Module <--> [Air Bag Control Module] > < Deployment Procedures|Page 13434
Page 4
background image

Inflatable Restraint Instrument Panel Module Replacement

CAUTION:

^

Refer to SIR Caution in Service Precautions.

^

Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.

REMOVAL PROCEDURE

1. Remove upper IP trim panel.
2. Disable the SIR system.
3. Remove the connector (2) from the IP.
4. Remove the inflatable restraint IP module retaining bolts.

Ensure that you keep a firm hold of the IP module.

INSTALLATION PROCEDURE

1. Install the inflatable restraint IP module (1) to the mounting bracket through the front of the instrument panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the fasteners to the inflatable restraint IP module.

Tighten
Tighten the fasteners to 10 Nm (89 lb in).

3. Enable the SIR system.
4. Install the yellow connector (2) to the IP.
5. Install the upper IP trim panel.

Front Seat Side Impact Inflator Module Replacement

Refer to Side Air Bag service procedures.
See: Side Air Bag

Inflatable Restraint Sensing and Diagnostic Module <--> [Air Bag Control Module] > < Deployment Procedures|Page 13434