C 3500 Truck 2WD V8-6.0L VIN U (2001)
5. Remove the bolts (2) retaining the power steering cooler from the radiator support.
6. Remove the power steering cooler from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the power steering cooler (1) to the vehicle.
-
Tighten the power steering cooler retaining bolts to 5 Nm (44 inch lbs.).
2. Connect the power steering outlet hose (3) to the power steering gear (4).
Install the retaining clamp.
3. Connect the power steering inlet hose to the power steering pump (5).
