C 3500 Truck 2WD V8-6.0L VIN U (2001)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
1. Place a drain pan under the pump.
2. Remove the power steering pulley. Refer to Power Steering Pulley Replacement.
3. Remove the hoses from the pump.
4. Remove the bolts from the front of the pump.
5. Remove the nuts (4) from the rear of the pump (1).
6. Remove the pump from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
