C 3500 Truck 2WD V8-6.0L VIN U (2001)
Torque Converter: Service and Repair
4L60-E - Automatic Transmission
Flywheel to Torque Converter Bolt Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the starter.
3. Remove the converter housing access plug.
4. Mark the converter and flywheel for proper alignment for installation.
5. Remove the right side transmission cover bolt.
6. Remove the right side transmission cover.
7. Remove the flywheel to converter bolts through the starter opening.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
